Stud Finder, 3 in 1 Multi-Function Wall Stud Sensor Detector with LCD Display

Description

KULED Stud Finder is a easy-to-use, also a necessary tool that quickly and easily locates the edges of wood and metal studs and joists behind walls, floors, and ceilings etc.
This stud finder operates by slowly slide device horizontally across wall, right of left. When full bars appears on the LCD and steady tone sounds, you have located the edge of the stud.
Battery installation
1.Open battery door on back of case. 2.Connect a 9-volt battery to battery clip. 3.Insert battery into case and replace battery door.
Package Contents
1 x Stud Finder 1 x 9V battery (included) 1 x User Manual
Stud sensor scanner depth: detects stud up to 0.71 inches (18mm), metal up to 3 inches (76mm), deep Scanning up to 1.25 inches (32mm), presence of live wire up to 3 inches (76mm)
3 in 1: multi-scanner stud finder for wood, metal, deep, AC current. Quickly locates edges and center of wood, wall studs, metal pipes, wooden joist, rebar behind walls, floors and ceilings, also indicates the presence of live AC wire
Easy to read: LCD with digital display and continuous sound warning indicating you the location of the edges of the studs
Easy to use: only three buttons, first press on/off button, then select the probe Type, after that just press and hold the ?scan button?(at the left side of the device) and scan horizontally across the object surface. Auto power off without any operation after 60 seconds
Compact design is easy to hold and use. Low battery indication. Battery: 1x9V battery?included?