Ford 9 Inch 1310-Series Short/Small Pinion Yoke, 28-Spline

Description

It is a re-creation of the original Ford 9-inch “short” pinion yoke, Made out of forged carbon steel for strength and durability, The use or modern forged steel offers far more value than a junkyard yoke, Features a machined relief cut to clear standard and Daytona pinion supports, Will fit all 28 spline 1.218” Ford 9-inch pinion gears
Ford 9 Inch 1310-Series Short/Small Pinion Yoke, 28-Spline
Sku # 80292417
Mfr. Part # 80292417
Condition
New
Brand
Speedway Motors
Sold
Each
Details
Notes
We recommend that this yoke be installed with a pinion spacer and shim kit (9190921) and a new pinion nut (9196887) torqued to 175 ft lbs.
Info
Stop scrounging the junkyard for those hard to find Ford pinion yokes. Whether you’re rebuilding a stock unit for your favorite old Ford, or putting the final touches on that “bullet-proof” Ford 9-inch third member build, start fresh and save time with a new Speedway Motors Forged Short Pinion Yoke.
We replicated the original “short” 4-inch length yoke found on many late model Ford cars and trucks and updated it using modern forged carbon steel. Whether you’re restoring a vintage 1950’s-80’s Ford or Mercury to OEM specs or hooking up that ground-pounding, high-horsepower custom build – our forged pinion yoke can handle it.
This yoke will fit any Ford 9-inch with a 28-spline, 1.218” diameter pinion gear, and uses common 1310 series U-joints (91048315). Machined relief cut provides for simple, bolt-on installation when used with an OEM standard or our Daytona-style pinion support (91048399) on your Ford 9-inch third member assembly.
Step up to a modern, easy-to-install and durable solution for your Ford 9-inch rebuild by choosing a Forged Pinion Yoke from Speedway Motors.
Re-creation of the original Ford 9-inch “short” pinion yoke
Made out of forged carbon steel for strength and durability
Modern forged steel offers far more value than a junkyard yoke
Machined relief cut to clear standard and Daytona pinion supports
Fits all 28 spline 1.218” Ford 9-inch pinion gears
Uses common 1310 series U-joints
Specs
Thickness of ear where u-bolts go through is .818" or 13/16"
Depth from face to bottom of u-joint cap recess is .520 or 1/2" plus
Space between ears where u-joint caps fit is 3.211" or 3-3/16" plus
Overall length is 4"
Outside diameter at seal area is 1.813"
Center to center of u-bolt holes is 1.415"
Application
This Part Fits
This pinion yoke is an OEM replacement for the following year/make/models listed:
1966-86 Bronco
1964-77 Comet
1967-79 Cougar
1968-83 E-100 1/2 ton
1979-88 E-150 1/2 ton
1968-74 E-200 3/4 ton
1957-83 F100
1968-87 F150
1957-71 Fairlane
1960-70 Falcon
1959-74 Galaxy
1975-79 Granada
1975-80 Grand Marquis
1965-79 LTD
1968-71 Mark III
1970-78 Maverick
1965-73 Mustang
1957-79 Ranchero
1955-79 Thunderbird
1968-76 Torino/ Grand Torino
WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov
Specs
Sold in Quantity
Each
Finish
Natural
Spline Count
28
Yoke U-Joint Series
1310
Material Type
Forged Steel
MFG. Part #
80292417
Yoke Width
3-7/32"
Yoke Style
Bolt On
Spline OD
1.218
Reviews
Parts were great!
Rated
by Woody on January 20, 2021
Summary:
Product was just what was required.
Yes, I recommend this product.
i would buy this product again
Rated
by kens classic on September 08, 2020
Summary:
good product and as described
Yes, I recommend this product.
Great price and quality part
Rated
by David on August 10, 2020
Summary:
I used this on a 73 torino 28 spine rear diff that is going into an old pick up. perfect fit.
Yes, I recommend this product.
I will not need to buy this product again, It is great.
Rated
by Al on August 05, 2020
Summary:
Rebuilding a 9" Ford rear assembly and wanted to the yoke with shield. It is new, clean and fit perfectly.
Yes, I recommend this product.
I would buy again
Rated
by Wally on May 21, 2020
Summary:
Does what I need it to do
Yes, I recommend this product.
Related Items / Suggested Parts
9 Inch Ford Viton Pinion Seal
9 Inch Ford Solid Pinion Bearing Spacer Kit with Shims
Speedway 1310 Series Chevy to Chevy U-Joint
Fast Shafts BBSK-10 Billet U-Bolt Strap Kit, 1-1/16 Inch
Pinion Nut for 9 Inch Ford
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.